Channel magnets

Channel magnets consist of a U-shaped steel profile into which a neodymium block magnet is embedded. This design strengthens the holding power of the magnet enormously at direct contact with a counterpart. Additionally, the steel coating protects the fragile magnet from damages caused by repeated blows.
Thanks to the existing countersunk hole, you can securely fasten the channel magnets with countersunk screws to suitable surfaces. They can also be easily set into grooves.

We also carry matching steel counterparts in our assortment (shown as an accessory of the respective article). In addition, you can also find round screw-on pot magnets as well as screw-on magnets without steel profile in our shop.

Filter

Reset filter

Strength kg

9 items

Display:

Load...

CSR-15-15-04-N

Channel magnet 15 x 15 x 4 mm, holds approx. 5,5 kg, with countersunk hole, in U-shaped steel profile

	1 pc.	2,81 EUR ea.*
from	3 pcs.	2,46 EUR ea.*
from	10 pcs.	2,15 EUR ea.*
from	20 pcs.	2,00 EUR ea.*
from	40 pcs.	1,87 EUR ea.*
Ask for a rebate from 350 pcs.

Available: 38 842 pcs.

CSR-20-20-04-N

Channel magnet 20 x 20 x 4 mm, holds approx. 10 kg, with countersunk hole, in U-shaped steel profile

	1 pc.	3,34 EUR ea.*
from	3 pcs.	2,94 EUR ea.*
from	10 pcs.	2,57 EUR ea.*
from	20 pcs.	2,40 EUR ea.*
from	40 pcs.	2,24 EUR ea.*
Ask for a rebate from 300 pcs.

Available: 46 487 pcs.

CSR-25-13-04-N

Channel magnet 25 x 13 x 4 mm, holds approx. 10 kg, with countersunk hole, in U-shaped steel profile

	1 pc.	3,04 EUR ea.*
from	3 pcs.	2,71 EUR ea.*
from	10 pcs.	2,42 EUR ea.*
from	20 pcs.	2,27 EUR ea.*
from	40 pcs.	2,15 EUR ea.*
Ask for a rebate from 600 pcs.

Available: 5 122 pcs.

CSR-40-20-04-N

Channel magnet 40 x 20 x 4 mm, holds approx. 17 kg, with two countersunk holes, in U-shaped steel profile

	1 pc.	5,14 EUR ea.*
from	3 pcs.	4,52 EUR ea.*
from	10 pcs.	3,97 EUR ea.*
from	20 pcs.	3,70 EUR ea.*
from	40 pcs.	3,46 EUR ea.*
Ask for a rebate from 220 pcs.

Available: 21 094 pcs.

CSR-40-40-04-N

Channel magnet 40 x 40 x 4 mm, holds approx. 25 kg, with two countersunk holes, in U-shaped steel profile

	1 pc.	8,30 EUR ea.*
from	3 pcs.	7,42 EUR ea.*
from	10 pcs.	6,63 EUR ea.*
from	20 pcs.	6,25 EUR ea.*
from	40 pcs.	5,91 EUR ea.*
Ask for a rebate from 260 pcs.

Available: 1 985 pcs.

CSR-60-20-04-N

Channel magnet 60 x 20 x 4 mm, holds approx. 29 kg, with two countersunk holes, in U-shaped steel profile

	1 pc.	7,59 EUR ea.*
from	3 pcs.	6,78 EUR ea.*
from	10 pcs.	6,07 EUR ea.*
from	20 pcs.	5,73 EUR ea.*
from	40 pcs.	5,43 EUR ea.*
Ask for a rebate from 300 pcs.

Available: 5 702 pcs.

CSR-80-20-04-N

Channel magnet 80 x 20 x 4 mm, holds approx. 37 kg, with two countersunk holes, in U-shaped steel profile

	1 pc.	9,02 EUR ea.*
from	3 pcs.	8,10 EUR ea.*
from	10 pcs.	7,27 EUR ea.*
from	20 pcs.	6,88 EUR ea.*
from	40 pcs.	6,52 EUR ea.*
Ask for a rebate from 300 pcs.

Available: 2 258 pcs.

CSR-100-20-05-N

channel magnet 100 x 20 x 5 mm, holds approx. 62 kg, with two countersunk holes, in U-shaped steel profile

	1 pc.	12,48 EUR ea.*
from	3 pcs.	11,02 EUR ea.*
from	10 pcs.	9,72 EUR ea.*
from	20 pcs.	9,09 EUR ea.*
from	40 pcs.	8,52 EUR ea.*
Ask for a rebate from 100 pcs.

Available: 4 743 pcs.

CSR-120-20-05-N

Channel magnet 120 x 20 x 5 mm, holds approx. 79 kg, with two countersunk holes, in U-shaped steel profile

	1 pc.	14,84 EUR ea.*
from	3 pcs.	13,10 EUR ea.*
from	10 pcs.	11,55 EUR ea.*
from	20 pcs.	10,80 EUR ea.*
from	40 pcs.	10,13 EUR ea.*
Ask for a rebate from 100 pcs.

Receive e-mail when item available again

Features of screw-on channel magnets

Principle: The strong neodymium magnets are embedded in a U-shaped steel profile. The steel reinforces the adhesive force of the magnet if the magnet touches a thick iron surface directly. If there is no direct contact with the counterpart or when the iron sheet is thin, painted or rough, the magnet's adhesive force is much weaker.

Please note: Neodymium magnets are brittle and can break if too much force is applied. Therefore, when screw-mounting these magnets, we recommend a maximum tightening torque of 2 Nm.

Displacement force: The indicated adhesive force was measured perpendicular to the adhesive base. In order to move the magnet sideways, much less force is necessary. Therefore, if you use a flat rod on a wall, you can put much less weight on it than when you use it on a ceiling.

Rust: These magnets are not rust-proof and therefore only designed to be used in the dry indoors.

All additional information about these products can be found in our FAQ about pot magnets.