Neodymium hook magnet Ø 20 mm, holds approx. 13 kg

Same same but different: Same product, new item number. The hook magnet FTN-20 is now called BD-FTN-20.

With these strong magnetic hooks, you can conveniently attach office and kitchen utensils, clothing, etc. to ferromagnetic surfaces. The magnetic hooks reveal their full adhesive force when attached to the underside of thick steel beams and the load pulls vertically downward.

If you would like to attach the hook magnet to a ferromagnetic surface on a wall, please take note of the displacement force indicated above. This specification corresponds to the maximum weight the magnetic hook can support on the wall under optimal conditions.

Please note: Carefully screw the hook into the threaded bushing as far as it will go.

The full adhesive force is achieved when the ferromagnetic counterpart is smooth and of sufficient thickness and when the pot magnet makes direct and full flush contact. Pot magnets already lose much of their adhesive force at a distance of only half a millimetre to the ferromagnetic surface. This characteristic is more pronounced in pot magnets than in other ferrite and neodymium magnets. You can find additional fascinating information on our FAQ page about pot magnet features.

This article is a product bundle. It is a combination of two items that come individually packaged. For more information, visit our FAQ page about product bundles.

Items 1 and 2

Manufacturer: Webcraft GmbH / supermagnete, Industriepark 206, 78244 Gottmadingen, Germany, support@supermagnete.com